Join the community

Expand your knowledge

NICET® Electrical Testing Level III – Test Prep

[Unofficial]

NICET® Electrical Testing Level III – Test Prep

Technicians inspect electrical control panels during certification training

Instructor

Bill Monroe

NICET® Electrical Testing Level III – Test Prep

Skill: Advanced

Last Update: November 9, 2026

Lessons: 102

Confirm your name below. This is how it will appear on your certificate.

Course Overview

This course prepares experienced electrical testing technicians for the NICET® Electrical Power Testing Level III exam. Built around the updated 2026 exam outline, it develops the knowledge and judgment needed to plan testing work, lead a field team, evaluate equipment condition, and troubleshoot electrical power systems.

Building on Level II testing skills, the course emphasizes advanced equipment testing, test result analysis, and protection and control systems. Practical examples and case studies connect the material to field decisions using ANSI/NETA ATS and MTS, NFPA 70E, NFPA 70B, the National Electrical Code, and applicable IEEE references.

Key learning objectives

  • Site-specific safety planning: Learn to develop worksite safety plans that address electrical hazards, isolation and switching coordination, PPE selection, emergency response, and changing site conditions.
  • Project testing and job planning: Translate a scope of work into a testing plan. Determine test sequences, equipment and personnel needs, outage requirements, and documentation expectations.
  • Test result evaluation: Check whether test data is valid before drawing conclusions. Compare results with applicable criteria, manufacturer information, similar equipment, and historical records to assess equipment condition and serviceability.
  • Advanced equipment and system testing: Explore testing methods and result analysis for switchgear, circuit breakers, transformers, cables, and rotating machinery. Recognize test limitations, setup errors, and conditions that warrant additional investigation.
  • Applied electrical theory: Strengthen your understanding of three-phase power, transformer behavior, grounding, instrument transformers, and relay and metering relationships. Examine short-circuit concepts, protective coordination, and arc flash mitigation techniques.
  • Electrical documentation review: Verify drawings against equipment nameplates and actual site conditions. Recognize the essential components of short-circuit, protective device coordination, and arc flash studies, and document discrepancies clearly.
  • Protection, control, and automation: Study advanced relay elements, instrument transformer testing, multifunction relays and meters, SCADA components, and functional test plans. Use drawings and test results to troubleshoot protection and control circuits.
  • Technical judgment and reporting: Use available evidence to recommend additional testing or corrective action. Communicate findings, uncertainty, and return-to-service recommendations within the technician’s assigned authority.

NICET® is a registered trademark of the National Institute for Certification in Engineering Technologies. NETA® is a registered trademark of the InterNational Electrical Testing Association. Prime Systems Academy is not affiliated with or endorsed by NICET or NETA. This course provides independent educational resources for certification preparation. Course completion does not award NICET certification.

What You'll Learn?

Advanced electrical testing and test result analysis

Project testing plans, safety, and equipment evaluation

Protective relays, control systems, and troubleshooting

Who's this for?

Experienced technicians preparing for NICET Level III

NICET Level II technicians advancing their careers

Field supervisors and electrical testing professionals

Lessons

> Welcome to NICET Level III Electrical Power Testing
> What the updated NICET Level III exam covers
> The Level III technician role
> How Level III builds on Level II
> How to study for this course
> Level III safety responsibilities
> Elements of a worksite safety plan
> Identifying site-specific electrical hazards
> Job hazard analysis for testing work
> PPE and test equipment safety planning
> Emergency response planning
> Stop-work authority at Level III
> What a LEvel III test plan does
> Reviewing the scope of work
> Using NETA ATS and NETA MTS in test planning
> Using NFPA 70B and NFPA 70E in test planning
> Using NFPA 70 and equipment standards
> Determining test sequence
> Planning test equipment and resources
> Planning outage and switching needs
> Planning documentation requirements
> Level III test plan case study
> Level III test results evaluation
> Test result validity
> Comparing results to standards
> Comparing results to like equipment
> Comparing results to historical data
> Interpreting abnormal results
> Identifying possible test setup errors
> Equipment condition assessment
> Serviceability decisions
> Test result evaluation case study
> Advanced testing overview
> Switchgear testing overview
> Switchgear visual and mechancial evaluation
> Switchgear insulation and resistance testing
> Circuit breaker advanced testing
> Circuit breaker result analysis
> Transformer testing overview
> Transformer insulation and winding tests
> Transformer power factor and dissipitation factor
> Transformer liquid test awareness
> Cable testing overview
> Cable insulation and withstand testing
> Cable diagnostic testing awareness
> Rotating machine testing overview
> Rotating machine insulation testing
> Rotating machine winding and connection tests
> Advanced testing case study
> Level III electrical theory overview
> Three-phase power review
> Transformer theory for Level III
> Short-circuit current basics
> Protective device coordination basics
> Arc flash fundamentals
> Arc flash mitigation techniques
> Grounding theory
> Instrument transformer theory
> Relay and metering theory
> Complex electrical concepts review
> Level III documentation responsiblities
> One-line diagram review
> Three-line and schematic review
> Nameplate-to-document verfication
> Field condtion-to-document verfication
> Short-circuit study components
> Protective device coordination study components
> Arc flash study components
> Documenting discrepencies
> Documentation review case stud
> Protection, control, and automation overview
> Advanced protective relay elements
> Relay test set setup
> Testing advanced protective relaying elements
> Instrument transformer testing
> CT and PT circuit troubleshooting
> Multifunction protective relay testing
> Multifunction meter testing
> SCADA and automation components
> SCADA and automation approaches
> Functional test plans
> Troubleshooting P&C systems
> P&C case study - breaker trip circuit problem
> P&C case study - multifunction relay misoperation
> Level III troubleshooting mindset
> Building a fault timeline
> Using test data to narrow the problem
> Identifying additional testing needs
> Return-to-service recommendations
> Corrective action recommendations
> Communicating uncertainty
> Troubleshooting case study
> Site safety plan review
> Project testing plan review
> Test result evaluation review
> Advanced testing review
> Electrical theory review
> Electrical documentation review
> Protection, control, and automation review
> Common NICET Level III exam traps
> Final practice exam
0
0 out of 5 stars (based on 0 reviews)
Excellent
Very good
Average
Poor
Terrible

NICET® Electrical Testing Level III – Test Prep

Skill: Advanced

Last Update: November 9, 2026

Lessons: 102

Confirm your name below. This is how it will appear on your certificate.

Full Access with Plus

Explore our other courses

Electrical testing certification course advertisement

Course

[Unofficial]

NICET® Electrical Testing Level I Test Prep

View the Course
Technician preparing for electrical testing certification course.

Course

[Unofficial]

NICET® Electrical Testing Level II Test Prep

View the Course
Power generation equipment at Prime Systems Academy course

Course

[Unofficial]

EGSA On-Site Power Apprenticeship Course

Coming 2026

Coming Soon
Technician inspecting electrical control panels with clipboard

Course

[Unofficial]

NFPA 70B 2026 Equipment Maintenance Implementation

Coming Soon

Progress 0%

Coming Soon
Technician in arc flash suit inspecting electrical panel

Course

[Unofficial]

NFPA 70E for Electrical Maintenance Workers

Coming Soon

Progress 0%

Coming Soon
Electrical transformer with power lines.

Course

Transformer Theory and Application

Coming Soon

Coming Soon